Inventory Listing

Powerful Inventory Marketing, Fully Integrated

2020 Peterbilt 567 with Ferrari 7213C Knuckle and 22' Deck - White - LD631636

2020 PETERBILT 567 SBFA WITH FERRARI 7213CR.A4 NOCE CRANE AND 22′ DECK

One (1) only – Ferrari 7213CR.A4 NOCE crane complete w/ the following:
• Maximum lifting capacity of 10,417 lbs. at 14.37’
• Maximum lifting capacity of 6,845 lbs. at 20.83’
• Maximum lifting capacity of 5,027 lbs. at 27.3’
• Maximum lifting capacity of 3,913 lbs. at 34.09’
• Maximum lifting capacity of 3,230 lbs. at 40.88 (end of Hyd. Extensions)
• Approx. 6,349 lbs. dry weight
• 415 degree rotation (non-continuous)
• (4) Hydraulic Extensions (Max Reach 40.88’)
• Hydraulic Out & Down Stabilizers (Max Width 18.04’)
• Oil Tank Capacity 130 L
• Slewing Hook, 8 Ton
• Control Valve DANFOSS PVG32
• Multifunction Hetronic Radio Remote Controls
• Red Power, Link on Column = Constant Lifting Capacities (on all main boom positions)
• Link on Second Boom = Negative Boom Angle (giving access to low ceiling space areas)
• Magic Touch (fold and unfold automatically with a press of a button!!)
• Hydraulic Load Limiting Device (NO CE)
• Centralized Greasing System
• Ergonomic Ground Control Station (one side) Easy to Use & Safe.
• Load Holding Valves (on all hydraulic cylinders)
• Unit painted Ferrari Red.
• Unit Completely Installed Including Hydraulic Oil & Testing
• Engineers NDT Certification Included

One (1) only – Custom 22’ deck complete w/ the following:
• Deck dimensions approx. 22’ long x 8’ wide.
• Perimeter of deck to be 3”x 5” x ¼” angle iron.
• Weld in 3” formed steel cross sills 16” on center.
• Weld on (2) 5” channel long sills full length of deck for mounting to chassis.
• Top of decking to be 2”x 8” wood (Fir) boards treated with linseed oil screwed down.
• Front billboard made of 4”x3”x1/4” steel square tubing. Clad back side of headache
rack with expanded steel mesh approx. 30” high x 96” wide c/w 5/8” colled rolled grab
handles, one per side. Installed at front of deck.
• Supply & install (2) 24”x 24”x 30” smooth aluminum cabinets under deck. Cabinets to
have one smooth aluminum swing down drawer with chains to keep door from opening
more than 90 degrees. Whale tail latches w/ matching locks & stainless steel hinges. To
be mounted to cross sills under the deck, one per side c/w ¼” x 2” flat bar(s) inside tool
boxes to reinforce mounting bolt locations.
• 1 per side cold rolled access ladders to deck w/ flat grip strut material on step surface.
• 1 per side pull-out style chain hangers drill & bolted to frame.
• 1 per side outrigger pad holders to fit a set of 24”x 24”x 1.5”outrigger pads (set of
composite pads included).
• Mud flaps front and rear of drive tires with anti-sail brackets.
• Stake pockets & rub rails both sides, split rub rail in the middle to accommodate
clearance light(s).
• Rear apron width of frame rails with air style pintle hitch complete with d-rings, trailer
plug and glad hands.
• All steel rigging sandblasted, primed, and finish painted black.
• All clearance lighting to be LED to CMVSS specs.
• DOT red/silver reflective tape to NSM specs.

CONTACT YOUR LOCAL SOUTHERN ALBERTA SALESMAN FOR MORE INFO!

  • There are no features available
Condition: Brand New
Body Style: Crane/Picker
Unit Number: LD631636
Engine: PACCAR MX-13
Transmission: RTLO16913A
Front Axle: PACCAR 20,000LBS
Front Susp: TAPER LEAF SPRINGS
Rear Axle: MERITOR MT40-14X
Rear Susp: AIR TRAC
Axle Ratio: 3.90
Rear Axle Lock: DIFF LOCK, BOTH AXLES
Wheelbase: 286"
Hood: 115" BBC
Sleeper: DAY CAB
Interior Style: PREMIER
Interior Colour: STERLING GREY
Exterior Colour: WHITE

Financing Calculator

Cost of Vehicle ($):
Down Payment ($):
Annual Interest Rate (%):
Term of Loan in Years:
Frequency of Payments:
Calculate My Payment
NUMBER OF PAYMENTS: 60
PAYMENT AMOUNT: $ 89.11
Back to top